Swimming pool leak detection Cromer

Yes, we serve the majority of the UK via our network of nationwide leak detection engineers.

Water typically escapes into the ground around the pool, soaking the soil beneath and sometimes causing damp or soggy areas. In some cases, it may leak into nearby drains or underground voids, making leaks harder to spot.

The time depends on the size of your system and the complexity of the leak, but most leaks can be located and repaired within the same visit. We aim to get you back to warm floors with minimal delay.

Yes, we are the only water leak detection company that do both find and fix your leaks. Our teams are all highly experienced plumbing and heating engineers, many of whom have been tracing and repairing water leaks around Cromer for many years.

We are on most occasions able to provide a repair service for your water leak once it has been located, this will, however, depend on the exact location of the leak along with several other factors.

Detecting a pool leak starts with observing signs like unexplained water loss, wet or spongy ground around the pool, or air bubbles in return jets. You can perform a simple bucket test by comparing evaporation rates, but for accurate results, professional leak detection using pressure tests, dye tests, and electronic equipment is best.

We specialise in locating water leaks under floors, on central heating systems, on water mains, hot and cold water feeds. The list is almost endless, but if you have a water leak in a property then we should be able to help you – Simply give us a call on 01263 569498 to find out.

You might not see water, but you can still spot the signs:

• Peeling paint or wallpaper
• Musty smells or mould near skirting boards
• Sudden warmth in one spot on the floor
• Unexplained increase in heating bills

We use advanced detection methods to trace hidden leaks without drilling or digging. If you’re in Cromer and suspect something’s wrong, it’s best to get it checked early.

Poolside concrete typically lasts 20 to 30 years, depending on factors like climate, maintenance, and use. Regular upkeep and prompt repairs of cracks or damage help extend its lifespan.

Absolutely. With trace and access methods, we only open up the area where the leak is. Our tools help pinpoint the exact spot, so there’s no need to lift your entire floor, just the part that needs fixing.

Here’s what to do straight away:

1. Switch off the heating system to stop further water loss.
2. If safe to do so, shut off the water supply.
3. Don’t try to open up walls or floors, this can make things worse.
4. Call a qualified leak detection expert like ADI Pro Leak Detection.

We’ll respond quickly to locate the leak, advise on next steps, and help you get your system back up and running with minimal disruption, especially if you’re in the Cromer area.

Yes, we have a sample of reviews on our site from Google, Trustpilot, Yell and Bark, plus customer emails and reference jobs available

Start by checking your Cromer boiler pressure, if it keeps dropping without reason, it could point to a leak. Other common signs include:

• Cold patches on radiators
• Damp or discoloured spots on walls or floors
• Unusual sounds like hissing or bubbling
• Higher than usual energy usage

At ADI Pro Leak Detection, we use specialist tools like thermal imaging, acoustic listening devices, and tracer gases to locate hidden leaks accurately, without any damage to your property.

Common signs include:

• Cold spots or uneven heating on the floor
• Unexplained drops in boiler pressure
• Damp or mould patches appearing
• A spike in your heating bills
• Gurgling or hissing noises coming from the floor

If you notice any of these in your Cromer home, it’s time to book a professional inspection with ADI Pro Leak Detection.

It depends on the leak’s location and severity. Some leaks, like faulty fittings or surface cracks, can be repaired quickly. Others, such as underground pipe leaks, may require more work and specialised equipment. A professional inspection from ADI Pro Leak Detection will give you the best idea of repair complexity.

Leaks can be sneaky, especially if they’re under floors or inside walls. Start with these checks:

• Monitor the boiler pressure over a few hours
• Look for damp areas on floors or ceilings
• Listen for unusual noises from the pipes or radiators
• Check for hot spots on the floor that shouldn’t be there

If you’re still not sure, our Cromer leak detection specialists can carry out a full inspection using non-invasive technology to pinpoint the source fast.

Yes, if left unchecked, leaks can lead to:

• Water damage to the flooring and subfloor
• Mould and mildew buildup
• Structural damage in severe cases
• Decreased heating efficiency and rising energy costs

Early detection helps prevent bigger repair bills.

We use non-invasive leak detection methods that won’t damage your floors. These include:

• Thermal imaging to spot cold or damp areas under the surface
• Acoustic listening to hear escaping water
• Pressure testing to identify sudden drops in system pressure

Once located, we can access the area with minimal disruption and repair the leak quickly.

We have a specialist crew who pinpoint the location of external water mains leaks in our Cromer homes or business. Using a complete range of specialist leak detection tools, equipment and expertise we are able to accurately locate water leaks on long and short stretches of water mains.